
Thickener Underflow
SDM ECO compared to nuke in thickener underflow
Online Ultrasonic density and concentration measurement Putten · 52.26° N 5.61° E 14:32:07 CEST
Mill overload or underload can quietly reduce efficiency long before operators notice. With real-time density monitoring from the Rhosonics SDM ECO, plants can keep the grinding circuit in balance, stabilize downstream flotation, and maximize overall plant performance – all without the regulatory and safety concerns of nuclear devices.
Photo · Rhosonics
In mineral processing, even small fluctuations in the grinding circuit can impact the entire plant. Mill overloads, underloads, and inconsistent feed to flotation often start with one root cause: unstable slurry density. By monitoring density in real time, operators gain the insight they need to keep the process balanced, efficient, and predictable. This blog explores how real-time density control – especially with technologies like the Rhosonics SDM ECO – helps prevent costly disruptions and enhances overall plant performance.
The grinding circuit is a critical stage in any mineral processing plant. Before minerals reach the flotation cells, they must be ground to the optimal size to enable efficient separation. However, maintaining proper control of the ball mill remains a challenge; one that can greatly influence the stability and overall performance of the plant.
When the mill is overloaded, it can cause increased vibrations or draw too much power. Throughput drops, grinding efficiency decreases, and the downstream process becomes unstable. When the mill is underloaded, the grinding media are underutilized, energy is wasted, and the feed to flotation becomes inconsistent. Both conditions hurt recovery and increase operational costs.
Maintaining the right slurry density inside the mill is therefore essential. It directly determines the grinding efficiency, particle size distribution, and the stability of the next processing stages.
Slurry density acts as a real-time fingerprint of what’s happening inside the mill.
Monitoring this density continuously allows operators to react before the process drifts out of balance. By keeping the mill feed and discharge density stable, you ensure consistent grinding performance and a steady feed to flotation.
Relying only on manual sampling or delayed lab data often means these problems are discovered too late. Real-time measurement is key for proactive control.
Rhosonics’ SDM ECO ultrasonic density meter gives operators continuous, accurate density data from critical process streams — such as the mill discharge, cyclone feed, or flotation feed line. Unlike nuclear sensors, the SDM ECO is completely non-radioactive, safe, and easy to install and maintain.
With real-time feedback, operators and control systems can:
A stable mill means a stable flotation process. By integrating SDM ECO sensors in both grinding and flotation circuits, plants can monitor density across the entire process chain — from comminution to recovery.
This integrated control leads to:
Mill overload or underload can quietly reduce efficiency long before operators notice. With real-time density monitoring from the Rhosonics SDM ECO, plants can keep the grinding circuit in balance, stabilize downstream flotation, and maximize overall plant performance – all without the regulatory and safety concerns of nuclear devices.
Real-time density control is not just an optimization tool; it’s the foundation of a stable mineral processing plant.

SDM ECO
Explore how SDM ECO supports continuous slurry density measurement without a radioactive source.
Explore SDM ECO →Discuss your application →
Download the SDM ECO brochure ↓
Contributors
Every piece is written by someone at Rhosonics and reviewed by an engineer who works with the instrument. Names, so you can ask them.
Words
More from Insights

SDM ECO compared to nuke in thickener underflow

In 2026, Rhosonics Expands Global Reach by Showcasing Ultrasonic Process Solutions at Premier Industry Events.

Maintaining stable process conditions is critical for efficient flotation. With the right instrumentation and integrated automation stable process con...
Tell us the medium, pipe size and operating conditions. An engineer will tell you which instrument fits and what to expect from it, in writing, so it can go in the file.